Our CZ scope base rails for the 452, 455, and 457 are made with the 11mm Dovetail.
https://support.mdttac.com/hc/en-us#
/hc/theming_assets/01HZPABF217PW62YCVX6C05SAM
FAQ
custom
/hc/en-us/requests/new
/hc/theming_assets/01HZPABF9TDE3GTJTAP38WATQA
Submit a request
Comments
hi, wich tork should I use?
Rimfire bases are 10-15 in/lbs.
Hi.
So I have a Cz 452 Farewell edition
And I purchased your Scope Base 20MOA Picatinny.
Package # 103566-BLK
The stamp mark on the Base is #103561-A
MDT CZ 452
It don’t fit it’s too small for the Dovetail .
Is there different product #for this Rifle
European vs USA size?
We build our rails to the 11MM dovetail size, so you likely have a 3/8 receiver one and our rails will not fit.
Put a 30moa rail on my 457. Torqued the mounting bolts to 15 inlb as per your website Torqued them again to ensure proper torque. As i torqued one of the bolts the second time the bolt broke. Can you tell me what size bolt i need for replacement. Thank you
Please reach out to us through the link below, and we can get you the hardware you need.
Submit a request – MDT Help Center (mdttac.com)
Please sign in to leave a comment.