Ryan Holmquist
- Total activity 124
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 95
Activity overview
Latest activity by Ryan Holmquist-
Ryan Holmquist created an article,
My Defiance Bolt Action handle touches the chassis
The Issue is the handle. The standard Defiance bolt handle requires a custom inlet in the stock or Chassis for the bolt handle. The Defiance bolt handle is Wider. You need to use the Modified Defia...
-
Ryan Holmquist created an article,
How do I change the grip on my XRS Chassis? VIDEO
There are four screws, two on each side, remove the four screws and the existing grip should slide off, slide the new grip profile on and reinstall the same four screws snugly.
-
Ryan Holmquist created an article,
How do I install my action in the XRS? - VIDEO
The action screws are captured within the chassis itself so it's a matter of lining up the trigger system with the hole in the chassis and the recoil lug. Then you will want point the muzzle up to...
-
Ryan Holmquist created an article,
Do you ship to Russia?
With current export regulations, we are unable to export and ship to Russia.
-
Ryan Holmquist created an article,
It's hard to insert a magazine - Video
The AICS pattern magazines can be harder to insert if you have not used one before, the magazine release is at the back and has constant spring pressure which you have to overcome to insert the mag...
-
Ryan Holmquist created an article,
Will the 224 Valkyrie mag work with 6.5 Grendel?
We have had a few customers try it with great success, the capacity is limited to 7 rounds of Grendel.
-
Ryan Holmquist created an article,
Will the Mag Extender work with the 5 round metal magazine?
Yes! There are no issues bolting it onto our 5 round metal magazine; please be aware that the top of the extender will sit about 6.5mm above the bottom flange of the magazine, which might make it ...
-
Ryan Holmquist created an article,
I can't log in to my account / My password isn't working
If you cannot log into your account, we advise clearing your cache and cookies from your browser history. If you still cannot log in, please request the password reset link and enter a new password...
-
Ryan Holmquist created an article,
Can you tell me what blemishes my Black Friday item will have?
Unfortunately no. If you purchase a Factory Second / Blemished unit, it will be fully functional, but it may not look perfect. We will still offer our MDT full warranty on the function of all our ...
-
Ryan Holmquist created an article,
Black Friday- What is a Blemished or Factory Second Item?
A blemished or factory second item is a fully functional MDT product with some aesthetic issues like a paint chip, scratch, or extra machine lines.